Ultrasound imaging parameters

US imaging parameters

An ultrasound imaging parameters element inside of a device tag is detected and loaded for specific devices.

Supported devices

Current devices include

• Ultrasonix ultrasound systems
• Interson USB ultrasound systems (old SDK) devices.

Device configuration settings

• 
  Device
  • 
    UsImagingParameters Imaging parameters container
    
    • 
      Contrast Is the contrast of B-mode ultrasound that is used to create the LUT.
      

      Default = "256"
    • 
      DepthMm Depth [mm] of B-mode ultrasound. If not specified then the current setting is used.
      

      Default = " "
    • 
      DynRangeDb DynRange [dB] of B-mode ultrasound. If not specified the current value is kept.
      

      Default = " "
    • 
      FrequencyMhz Ultrasound transmitter frequency [MHz] If not specified then the current setting is used.
      

      Default = " "
    • 
      GainPercent [%] of B-mode ultrasound; valid range: 0-100. If not specified then the current setting is used.
      

      Default = " "
    • 
      TimeGainCompensation [dB] Time gain compensation [N int values] If not specified then the current setting is used.
      

      Default = " "
    • 
      Intensity Is the intensity of B-mode ultrasound that is used to create the LUT.
      

      Default = "128"
    • 
      Sector [%] of B-mode ultrasound; valid range: 0-100. If not specified the current value is kept.
      

      Default = " "
    • 
      ZoomFactor Zoom [%] of B-mode ultrasound; valid range: 0-100. If not specified then the current setting is used.
      

      Default = " "
    • 
      SoundVelocity The speed of sound [m/s]. The minimum and maximum allowed value is specified on the Ultrasound computer, in the Exam software directory in the imaging.set.xml file (the parameter is soundvelocity). If an out of range value is specified in the configuration file then the Ultrasound system will ignore it. If the attribute is not specified then the current setting is kept.
      

      Default = " "
    • 
      Voltage
      

      Default = " "