PlusLib  2.9.0
Software library for tracked ultrasound image acquisition, calibration, and processing.
Ultrasound imaging parameters

US imaging parameters

An ultrasound imaging parameters element inside of a device tag is detected and loaded for specific devices.

Supported devices

Current devices include

Device configuration settings

  • element.png
    Device
    • element.png
      UsImagingParameters Imaging parameters container
      required.png
      • attribute.png
        Contrast Is the contrast of B-mode ultrasound that is used to create the LUT.
        optional.png
        Default = "256"
      • attribute.png
        DepthMm Depth [mm] of B-mode ultrasound. If not specified then the current setting is used.
        optional.png
        Default = " "
      • attribute.png
        DynRangeDb DynRange [dB] of B-mode ultrasound. If not specified the current value is kept.
        optional.png
        Default = " "
      • attribute.png
        FrequencyMhz Ultrasound transmitter frequency [MHz] If not specified then the current setting is used.
        optional.png
        Default = " "
      • attribute.png
        GainPercent [%] of B-mode ultrasound; valid range: 0-100. If not specified then the current setting is used.
        optional.png
        Default = " "
      • attribute.png
        TimeGainCompensation [dB] Time gain compensation [N int values] If not specified then the current setting is used.
        optional.png
        Default = " "
      • attribute.png
        Intensity Is the intensity of B-mode ultrasound that is used to create the LUT.
        optional.png
        Default = "128"
      • attribute.png
        Sector [%] of B-mode ultrasound; valid range: 0-100. If not specified the current value is kept.
        optional.png
        Default = " "
      • attribute.png
        ZoomFactor Zoom [%] of B-mode ultrasound; valid range: 0-100. If not specified then the current setting is used.
        optional.png
        Default = " "
      • attribute.png
        SoundVelocity The speed of sound [m/s]. The minimum and maximum allowed value is specified on the Ultrasound computer, in the Exam software directory in the imaging.set.xml file (the parameter is soundvelocity). If an out of range value is specified in the configuration file then the Ultrasound system will ignore it. If the attribute is not specified then the current setting is kept.
        optional.png
        Default = " "
      • attribute.png
        Voltage
        optional.png
        Default = " "